Taipower P89 is equipped with MediaTek MT8392 eight-core processor with a frequency of up to 1.7GHz and Mali450 graphics processor. The body has built-in 2GB RAM and 16GB ROM and can also be used with an external TF card. The P89 uses a 7.9-inch IPS retina screen with a resolution of 2048x1536 and a display accuracy of up to 326ppi. The display effect will never disappoint. However, in terms of cameras, the P89 is equipped with a rear 5-megapixel + front-facing 2-megapixel camera, but it lacks a fill light. Having said so much, everyone should have some understanding of Teclast p89, so what I want to share with you next is the steps to flash Teclast p89.

Taipower p89 flashing steps

1. Go to Taipower official website to download the p89mini firmware package and unzip it. Open the "Upgrade Tools" folder inside and first install: isocusb-driver-steup-1.0.1.exe.

2. Install InterAndroidDrvsetup1.1.5.exe after installation is complete.

3. Finally install PhoneFlashTool_3.1.8.2_win32.exe. Special note is that the above installation must strictly follow this order and be installed to the default path, otherwise the flashing will fail.

4. Open the "Firmware Program" folder and decompress the "p89min(e2w6)" compressed package. Copy the decompressed "p89min(e2w6)" folder to any root directory of your computer.

5. After installation, it will be inA "Phone Flash Tool" shortcut will appear on the desktop. Double-click it and click the "browser" button.

6. Click "browser" and a window to select flash.xml will pop up. Flash.xml is in the "p89min(e2w6)" folder in the root directory. Select it.

7. After selecting flash.xml, first turn off the tablet, then press and hold the side volume down button without releasing it, and then Connect to computer via USB. After waiting for a few seconds, the "start to flash" button will appear in the upgrade tool, indicating that the connection is successful and you can flash the phone.

8. Click "start to flash" to start flashing. When the progress bar reaches 100%, the flashing is successful. Unplug the cable and restart the tablet to use it normally.

Okay, that’s it for sharing the Teclast p89 flashing tutorial. In general, the workmanship of the P89 is relatively solid. The entire front screen and the rear semi-metal body are relatively tightly inlaid. Although the top and bottom of the back are made of plastic, they and the middle metal part are all frosted. So the feeling to touch is still very similar.